Tianjin TAIYITO Technology Co., Ltd 

taiyito

Home > Products > Security/Camera/Audio&Video > Security Product

    TDSK11 Wire Passive IR Detector

    • No.: TYTVST(IOS) TYTSmart (Android)
    • Brand :
    • Weight:

    TDSK11 Wire Passive IR DetectorDescription● Passive Infrared Motion Detector                    

    1. Detailed information

    TDSK11 Wire Passive IR Detector
    Tianjin TAIYITO Technology Co., Ltd

    Description

     Passive Infrared Motion Detector                    
     TAMPER protection

     White light immunity, insect proof housing

     Automatic temperature compensation, Work on stability

     Advanced digital signal processing

     Fast, easy installation, high reliability              
     SMD circuitry, excellent RFI immunity (CE)


     

    Specifications

    Power consumption      8~15V DC                    
    Operation temperature              
    -10~+55

    Active current               10~15 mA                  
    Detection coverage             
    12m/120
    °

    ALARM contact                     60V/0.1A(N.O., N.C.)    
    Warm up time                    
    20s

    White light immunity     6500LUX                            
    Detection speed                  
    0.1~0.4 m/s
    TEMPER switch                   60V/0.1A


     

    Installation

    The inspect coverage of detector is 12m/120°,and the recommended installation height is from 2 to 2.5 meters above the floor. Using the provided bracket, the detector can be installed on the wall or a corner conveniently. Do not place the detector close to any heating/cooling vents or near any other object that often changes temperature. The detector should not be placed near any item that generates a strong electromagnetic signal (transmitters, electronic regulators etc.). Avoid locations that have intense air circulation.

    A.  Attach the bracket with the two provided screws, being sure that the arrow on the bracket is pointing up. We recommend installing one screw in the pre-cut hole on the tampering sensor, which is at the bottom of bracket. The second hole can be easily punched through the other preformed hole. Tighten the screws firmly, and make sure that the bracket is not crooked.

    B.  Click on the complete detector (including cover) by using the two holes on underside of detector and two locks of the bracket. Note: Make sure that two lock holes cross through the fixing hole on the underside of detector, Check that the detector is fixed firmly.

    C.     Press in on both sides of the front cover 1/3 from the top to open the cover of the detector.


    Terminals

    +12V            -Power supply +12V DC

    GND             -Ground

    ALARM        -Alarm relay output (N.C. or N.O.)

    TEMP           -TAMPER switch output N.C.

    Alarm and Prompt

    Alarm LED delay: 2s

    Alarm Interval: 10s

    While the built-in sensor detects any movement of human body, the alarm LED will be on and the alarm output will turn to open form close.


     

     

    Connection drawing:

    Note: more detail and operations please find in manual.

     


    Powered by taiyito  ©2005-2017 www.taiyito.com