Tianjin TAIYITO Technology Co., Ltd 

taiyito

Home > Products > Intelligent Community > Building Room (Villa) Doorphone

    TDX6619-DR

    • No.: TYTVST(IOS) TYTSmart (Android)
    • Brand :
    • Weight:

    TDX6619-DR1  Functions and FeaturesCapacitive touch buttons, long life Realize video intercom and extension Receiving extension remote unlockingHousehold credit card lock (ID / IC optio

    1. Detailed information

    TDX6619-DR


    T2款-450.jpg


    1  Functions and Features

    • Capacitive touch buttons, long life

    •  Realize video intercom and extension

    •  Receiving extension remote unlocking

    • Household credit card lock (ID / IC optional)


    2  Usage

    • Press the call button to call the household.

    • Press “Answer Button” and you can answer the call with indoor unit. 3 minutes talking time.

    • Press “ Unlock” to remote control the door when talking.

    • With ID card / key remote control to enter.


    3  TDX6619-DR set up ----in the system settings of the indoor extension

    To make the TDX6619-DR set up, the first step to reset system for the indoor unit , which back to the factory condition ; at the same time ,the TDX6619-DR energized, press the system reset button, which also be restored to factory condition. Otherwise it is set unsuccessful.

    After the restoration of the indoor unit and TDX6619-DR -to-factory state, click on the "System Set" button on the indoor unit on the homepage, pop the System Settings page, shown in Figure 6-1:


    图6-1.png

    Picture 6-1


    set any indoor unit encoding, which using the current network configuration table 

    3.1 Setting Room Number

    In picture 6-1, click on the "Room" setting button, pop the page of setting, Set the code of indoor unit with the code in current network configuration table. as shown in picture  6-1.1:


    6-1.1.png

    picture  6-1.1


    3.2 Setting outdoor station

    In picture 6-1, click on the "villa" setting button, pop the page of setting, which change villa room number, as shown in Figure 6.1-2: 


    6.1-2.png

    Picture 6.1-2


    •  Tap “Villa ” , it will show the pane of villa.

    • Enter new number, if it exist in current network configuration table, it set successfully or fail. 


    NOTE: After you setting host room number, and extension need the same unit room number before the call.


    3.3  The instruction of Add Card

    The ways of adding card

    Add cards through the management software on the computer ( Please check  the details in software manual ).

    Issuing independent methods 

    make sure that the host can call the extension under the condition , on the TDX6619-DR click on the "Issuer", the interface will pop up "villa unit is issuing ..." the host will enter the issuing state, to swipe card on the host , the host will "drop" sound response that read the card, After finish issuing the host need restart to use.


    3.png


    Delete Cards

    make sure that the host can call the extension under the condition , on theTDX6619-DR click on the "Delete", the interface will pop up "villa unit is deleting ..." the host will enter the deleting state, to swipe card on the host , the host will "drop" sound response that read the card, After finish issuing the host need restart to use.


    4.png


    Lose Cards

    • If you lose a card, check the card’s number with the management software on the computer and delete the card.

    • You can also reset your outdoor station to delete all of your card, and re-add cards.


    4   Electrical Connection Description


    5.png

    • RJ45 Cable port: Clipping crystal head with B class standard network connection. 

    • Power Socket-outlet: “+” for 12V,  “- ” for ground wire . 2P power outlet line (red, black) behind it. Please follow the instruction.

    • CTL: Connect the normal open port of open button   

      GND: Ground wire, connect public port of open button 

      DET: Connect door sensor, another end of the door sensor connect with GND

    • Power locks signal wire interface:

    • COM: Common

      NO: Normal Open

      NC: Normal Close

    • Auto reset button: All the data will be initial data after resetting.


    • Note: The outdoor station is not connected to the lock directly. The rated current of outdoor station is 0.8A. If the rated current of locking is >0.8A, do not connect the electromagnetic lock to the outdoor station directly.

    Put a special power supply between the lock and outdoor station.

    Connect the lock to power supply with lock lines.


    5  Parameter


    Installation

     Embedded mountVoltage  DC12-15V  (Working)
    Working Current ≤250mA (dynamic current);  ≤200mA (static current)
    Camera750TVL HD COMS  Ring tone ≥70dB
    maximum power < 5WOperating Temperature  -20oC ~ +70oC 
    Dimension 175x96x42mm ( Surface ) ; 148x80x36mm ( Installation )
     Connection: CAT5e / Cat6 Cable  ( normal network cable )
     Power line : RVV2 * 0.75
     Lock line :  RVV2 * 0.75

    6  Note

    • Do not shake, collide, smash, punch the device;

    • Do not install the Outdoor Station in the following places:

    ※Under long-time exposure of burning sunshine;

    ※Where is of 40 Fahrenheit;

    ※Under long-time exposure of snow and frost;

    ※Where is very dusty;

    • When electrified, if there is any unexpected situation happened, please cut off power immediately until the fault is removed.

    • If there is abnormal status of system, please cut off power first. And then check for fault carefully. If the reason of fault cannot be found, please contact with supplier and do not try to repair by your own.

    • Please take good care of your proximity card. Do not wash and fold it and be careful of magnetism.


    7  Other

    • The right to interpret the specification for our company. If any question, please contact to our company.

    • In order to improve the design or improve the reliability of the company, we have the right to change manual of the specification, characteristics, data, materials, structure without further notice.

    • The product meets the design requirements on environmental protection. Please adherence to the rule of storage, using, and disposal. 



    Powered by taiyito  ©2005-2017 www.taiyito.com